8E1+4ETH PDH Fiber optical multiplexer

Product Overview

8E1+4ETH Fiber Optical Multiplexer is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*100M line Ethernet data, one channel RS232. The Ethernet bandwidth is set on bases of multiples of 32K.The outer design use the standard 19 inches rack, so the volume is small, weight is light and operation is convenient and credit.

8E1+4eth PDH Fiber Optics MultiplexerFeatures

  1. Provides 8 E1 transparent transmission;
  2. Provide 4 x 100M line Ethernet channels, supports mutual negotiate, Ethernet bandwidth is set on the bases of multiple of 32K;
  3. Provide one RS232 channel (optional);
  4. Provide one hotline channel (optional);
  5. The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 120KM depending upon the customers requirement;
  6. E1 interface code is HDB3,E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
  7. Ethernet port supports full/half duplex, 10M/100M auto-adaptable;
  8. Ethernet port supports VLAN function and has 4 division modes for user selection;
  9. Ethernet package size support 1916 byte and 4 Ethernet port could be set separately;
  10. Has complete alarm function and can monitor remote device status;
  11. Supports E1 loop from remote so as to detect and manage device conveniently;
  12. Available in both combinations AC220V and DC-48V for redundant power

Technical parameters

E1 interface:   

Interface code:       HDB3 code

Line speed:          2.048Mbp/s ±50ppm

Interface standard:    ITU-T G 703

Interface impedance:

75Ω/unbalanced (BNC) or 120Ω/balanced RJ45

Allowed attenuation: 0~6dBm

10/100Base-T Port:

Rate:          10/100M, full/duplex auto-negotiation

Protocol:       Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Entries:     4096 Entries

Connector:               RJ45

RS232/Console port:

Rate:    9600Kbps (Asynchronous)

Interface characteristic: Satisfies ITU-T V.24 standard

Connector:RJ45

Fiber interface:  

Optical wavelength:  1310nm/1550nm for single-mode optic interface for option

850nm/1310nm for multi-mode optic interface for option

Optical interface:        SC/FC/ST for option

Sending consumption:               -9dBm/-5dBm

Receiving and dispatching module:     >-6dBm

Optical receiver receiving sensitivity:   <-36 (BER<10):

Optical code:                       NRZ

Transmitting range: MM 2Km/5Km,

SM 20Km/40Km/60 Km/120Km for option